A 2 pocketed zipped pouch that can be threaded onto 50mm webbing. Both zips have toggles attached for easy opening. A plastic slide is attached on the reverse to prevent the bag moving around.

Size: 24cm x 17cm x 6cm

Textured nylon bottle cover with pouch attached at the side to carry a lifting bag or torch etc.

This spacious pouch will slide onto 50mm webbing and has a large velcroed flap.

Size 22cms x 23cms x 8cms.

The ideal pouch to carry a reel and S.M.B.A snap bolt at the top to attach to a D ring and a strap to fasten around the leg.

Size 28cms x17cms x 11cms.

This packet contains a pouch to carry the battery pack, 1 strap to go around the bottle and an elasticised holder on a quick pull Velcro tab.

This pouch will fit across most B.C.s and with a permanent secure point to one side, and a snap bolt to the other a quick kit down will be easily achieved. A divider is inside the pouch and a Velcro flap.

Size 20cms x 25cms x 9cms.

With a snap bolt at the top of this pouch, it can be easily attached to a D ring, and the strap at the base fastened around the leg. A Velcro flap and 2 drain holes complete this very popular pouch.

Size: 30cms x 18cms x 6cms.

Available in black only.

A simple pouch that will slide onto 50mm webbing, designed to carry a Bowstone 36Kilo Lifting Bag.

Size: 25cm x 8 cm x 8cm

An ample sized pouch to carry a spare mask or similar and will slide onto 50mm webbing. Velcro fastening on flap.

Size: 19cm x 13cm x 7cm

A pair of scissors and a knife tightly held in a strong pouch by two studs. Easy to release and put back.

A 2 or 3 pocketed, arm mounted slate holder. The diver can carry, and easily view more than one table or run time. Elasticated straps and Velcro fastening on pockets.

Inside pocket size 10cms x 14cms.

A 2 or 3 pocketed, arm mounted slate holder. The diver can carry, and easily view more than one table or run time. Elasticated straps and Velcro fastening on pockets.

Inside pocket size 10cms x 14cms.

A simple pouch that will slide onto 50mm webbing, designed to carry a rolled up Bowstone S.M.B.Velcro fastening on flap.

Size: 18cm x 7cm x 7cm

Designed to carry a second stage, and can be attached, by a webbing loop, around the neck of the bottle. With a Velcro flap this bag will keep your reg right where you want it until you need it.

A 2 pocket zipped pouch that can thread onto 50mm webbing or fit over an elasticised cumberband on a B.C.

Size 23cms x 15cms x 5cms.

The strap on this pouch will thread onto 50mm webbing, and can easily be removed by releasing the large slide release buckle.2 long straps can be fastened around the leg.

Size: 25cm x 17cm x 10cm.

The strap on this pouch will thread onto 50mm webbing, and can easily be removed by releasing the large slide release buckle.2 long straps can be fastened around the leg. The zip has a toggle attached for easy opening.

Size: 25cm x 17cm x 10cm.

The Quick Fit Weight Pocket is easy to fit to add weight for all requirements by attaching
to Wings/BCD Systems and trimming equipment without fuss. The pocket has a maximum
capacity weight of 2kgs block lead or shot.

The system comprises of two pockets flaps which are secured with strong Velcro and fastened together with a 25mm side release buckle. The weight may be quickly released by unfastening the side buckle and pulling down the lower flap of the pocket.

Designed to be fastened to standard 50mm webbing belts or cam belts, the rear of the pocket has a reinforced webbing loop so webbing straps may be threaded through for a permanent fix or alternatively secured simply and quickly using the rear overlapping Velcro straps.

The Quick Fit Weight Pocket is constructed from a strong Cordura material which provides
excellent durability even after numerous sea water immersions.

Each pocket weighs 0.1kgs without any weights attached. Approx dimensions: 95mm wide,
130mm length, 50mm depth.

Please note each pocket is sold individually.

The accessories pocket is made from a strong cordura material which gives excellent durability even after numerous sea water immersions. These pockets have one large compartment allowing stowage space for the Seeker DSMB with cylinder and a small reel etc.

The pocket is fastened by strong Velcro. It is fastened to the BC/Wing with two reinforced webbing loops which thread on to the 2" webbing waist strap.